Precision Locknut
Main Material: SCM440 Type: Locknut
Width: 11~73mm
Showing 401–416 of 496 results
-
-
Rod End Joint Bearing, Ball Head, Bent Rod Type
Main Materials: Zinc Alloy, Carbon Steel, Rubber
Type: Rod End Joint Bearing, Ball Head, Bent Rod Type
Length L: 35~109mm -
Rod End Joint Bearing, Ball Head, Straight Rod Type
Main Materials: Zinc Alloy, Carbon Steel, Rubber
Type: Rod End Joint Bearing, Ball Head, Straight Rod Type
Length L: 46~145.5mm -
Rolled Ball Screw, Block Nut Type, Shaft Diameter 15·20·25
Overall Length (L): 150–1500mm, Shaft Diameter: 15–25mm, Lead: 5–10mm, Main Material: SCM420
-
Rolled Ball Screw, Standard Nut Type, Shaft Diameter 10
Overall Length (L): 150–600mm, Shaft Diameter: 10mm, Lead: 2–10mm, Main Material: SCM420
-
Rolled Ball Screw, Standard Nut Type, Shaft Diameter 12
Overall Length (L): 150–800mm, Shaft Diameter: 12mm, Lead: 4–10mm, Main Material: SCM420
-
Rolled Ball Screw, Standard Nut Type, Shaft Diameter 15
Overall Length (L): 150–1200mm, Shaft Diameter: 15mm, Lead: 5–20mm, Main Material: SCM420
-
Rolled Ball Screw, Standard Nut Type, Shaft Diameter 20
Overall Length (L): 200–2000mm, Shaft Diameter: 20mm, Lead: 5–20mm, Main Material: SCM420
-
Rolled Ball Screw, Standard Nut Type, Shaft Diameter 25
Overall Length (L): 200–2000mm, Shaft Diameter: 25mm, Lead: 5–25mm, Main Material: SCM420
-
Rolled Ball Screw, Standard Nut Type, Shaft Diameter 28·32
Overall Length (L): 250–2000mm, Shaft Diameter: 28–32mm, Lead: 6–32mm, Main Material: SCM420
-
Rolled Ball Screw, Standard Nut Type, Shaft Diameter 8
Overall Length (L): 100–400mm, Shaft Diameter: 8mm, Lead: 2–4mm, Main Material: SCM420
-
Roller Guide Post Sets For Die Sets
Experience the pinnacle of stamping die performance with GUNRI’s advanced Needle Roller Guide Post Sets. Engineered for sub-micron (100nm-1µm) accuracy, our guide posts deliver exceptional rigidity, extended service life, and ultra-low vibration. Reduce wear, minimize downtime, and elevate your production quality to new heights. Available in diverse sizes and customizable options to perfectly match your high-precision demands. Contact us today to optimize your die sets!
-
Rotary joint round flange type double-sided cutting flange type
Material: SS400 Surface treatment: nickel plating, blackening Outer diameter D1: 85~160mm Height H: 55~68mm
-
Rotary joint single side flange double side flange type
Material: SS400 Surface treatment: nickel plating Outer diameter D1: 110~140mm Height H: 85mm
-
Round baffle, double-sided cut
Material: S45C Surface treatment: black Cylinder connector surface treatment: black, nickel plating Length A: 42~134mm
-
Round baffle, double-sided cut
Material: S45C Surface treatment: black Cylinder connector surface treatment: black, nickel plating Length A: 42~134mm