Linear Shaft / Standard Grade / One End Stepped & Tapped – One End External Thread / D Tolerance f8
Main materials: 45 (S45C)
Middle shaft diameter: 8~50
Shaft full length: 20~1500
Surface treatment: Hard chromium plating
Showing 209–224 of 252 results
-
-
Linear Shaft / Standard Grade / One End Stepped & Tapped / D Tolerance f8
Main materials: 45 (S45C)
Middle shaft diameter: 8~50
Shaft full length: 20~1500
Surface treatment: Hard chromium plating -
Linear Shaft / Standard Grade / One End Tapped (Standard Type) / D Tolerance f8
Main materials: 45 (S45C)
Middle shaft diameter: 8~50
Shaft full length: 20~1500
Surface treatment: Hard chromium plating -
Linear Shaft / Standard Grade / One End Tapped with Hex Hole / D Tolerance f8
Main materials: 45 (S45C)
Middle shaft diameter: 6~50
Shaft full length: 20~1500
Surface treatment: Hard chromium plating -
Linear Shaft / Standard Grade / Straight Shaft Type with Circlip Groove / D Tolerance f8
Main materials: 45 (S45C)
Middle shaft diameter: 6~30
Shaft full length: 20~1500
Surface treatment: Hard chromium plating -
Linear Shaft / Standard Grade / Straight Shaft Type with Keyway / D Tolerance f8
Main materials: 45 (S45C)
Middle shaft diameter: 6~50
Shaft full length: 20~1500
Surface treatment: Hard chromium plating -
-
-
-
Pivot Pins – Retaining Ring with Shoulder
A Pivot Pin with a Retaining Ring with Shoulder is a mechanical component used in assemblies where rotational or pivoting motion is required, while ensuring secure axial positioning.
-
Self-Lubricating Bushing – Acetal Resin Type
Material: Polyacetal resin (POM)
ID: 3–50mm OD: 8–65mm Length: 3–50mm -
Self-Lubricating Bushing – Bronze, Embedded Flange Housing Assembly, Single/Double/Extended Type
Material: SS400 (housing), high-strength brass alloy (bushing)
Surface Finish: Nickel plated
ID: 6–50mm OD: 12–80mm
Length: Single: 22–90mm Double: 37–170mm Extended: 52–188mm -
Self-Lubricating Bushing – Bronze, Embedded Flange Type with Spacer, Mid Flange
Material: High-strength brass alloy
ID Range: 8–50mm OD Range: 12–62mm Length: 20–100mm -
Self-Lubricating Bushing – Bronze, Flange + Washer Type, Flat Head Bolt or Short Bolt
Material: High-strength brass alloy
ID Range: 6.2–50.3mm OD Range: 25–100mm Thickness: 3–8mm -
Self-Lubricating Bushing – Bronze, Flanged Type, ID F7 or G6
Material: High-strength brass alloy
ID Range: 6–50mm OD Range: 10–62mm Length: 15–100mm -
Self-Lubricating Bushing – Bronze, Mid Flange Housing Assembly
Material: SS400 (housing), high-strength brass alloy (bushing)
Surface Finish: Nickel plated
ID: 6–30mm OD: 12–45mm Length: 37–128mm