Square magnet
Type: Square Material: Neodymium magnet Surface treatment: Nickel plated
Showing 353–368 of 373 results
-
-
Stainless Steel Deep Groove Ball Bearing, Contact Rubber Seal Type
Main Material: 9Gr18Mo Type: Single-Row Deep Groove Ball Bearing
Width: 8~16mm -
Stainless Steel Deep Groove Ball Bearing, Double Shielded
Main Material: 9Gr18Mo (SUS440C) Type: Single-Row Deep Groove Ball Bearing
Width: 5~20mm -
Stainless Steel Flanged Deep Groove Ball Bearing, Double Shielded
Main Material: 9Gr18Mo (SUS440C) Type: Single-Row Deep Groove Ball Bearing
Width: 2.3~7mm
-
Stainless Steel Small-Diameter Ball Bearing, Double Shielded
Main Material: 9Gr18Mo (SUS440C) Type: Single-Row Deep Groove Ball Bearing
Width: 2.3~9mm
-
Standard base bracket
Material: SS400, SUS304 Surface treatment: black, nickel plating Outer diameter A: 50~138mm Height L: 35~110mm
-
Standard square base bracket
Material: SS400 Surface treatment: black, nickel plating Height B: 20~70mm Outer diameter A: 40~110mm
-
Standard square bracket for base
Material: SS400 Surface treatment: black, nickel plating Height B: 20~70mm Outer diameter A: 40~110mm
-
Standard square hole bracket for base
Material: SS400, A6061 Surface treatment: black, nickel plating, black anodizing, natural anodizing Outer diameter A: 38~62mm Height L: 24~48mm
-
Super simple pillar fixing clamp, same diameter orthogonal type, same diameter orthogonal type with butterfly knob
Material: A6061 Surface treatment: Black anodized, natural anodized Height B: 10~22mm Length L: 29~54mm
-
Support base mounting base, simple through-hole type
Pillar material: S45C high frequency quenching, S45C, SUS304 Pillar surface treatment: nickel plating Bracket material: S45C, SUS304 Bracket surface treatment: chrome plating, nickel plating Height L: 50~450mm Outer diameter A: 38~82mm
-
Switch Probes – SNP Series
Mechanical ON/OFF switching via axial probe movement. Modular design integrates with automated test platforms for functional validation and safety interlocking. Collaborative spec adjustments supported.
-
T-type double bearing outer ring fixed bearing
Bearing seat material: S45C, SUS304 Surface treatment: black Bearing material: SUJ2 Inner diameter: 15~30mm Bearing seat height: 25~60mm
-
Tapered Roller Bearing, Outer Ring Without Rib, Standard Type
Main Material: SUJ2
Type: Tapered Roller Bearing, Outer Ring Without Rib, Standard Type
Width T: 13.25~90.5mm -
Tapped Dowel Pins – MSTM / MSTP / MSTH / MS
Our tapped dowel pin series (MSTM, MSTP, MSTH, MS) is widely used in die and mold bases, automation equipment, and jigs. These pins include center-tapped ends to allow for easy extraction or precise bolt locking.
-
Thin magnet with base
Outer diameter D: 4~25mm Material: SUM24L, neodymium magnet, SUS416 Surface treatment: nickel-plated, no