Stainless Steel Flanged Deep Groove Ball Bearing, Double Shielded
Main Material: 9Gr18Mo (SUS440C) Type: Single-Row Deep Groove Ball Bearing
Width: 2.3~7mm
Showing 321–336 of 337 results
-
-
Stainless Steel Small-Diameter Ball Bearing, Double Shielded
Main Material: 9Gr18Mo (SUS440C) Type: Single-Row Deep Groove Ball Bearing
Width: 2.3~9mm
-
Standard base bracket
Material: SS400, SUS304 Surface treatment: black, nickel plating Outer diameter A: 50~138mm Height L: 35~110mm
-
Standard square base bracket
Material: SS400 Surface treatment: black, nickel plating Height B: 20~70mm Outer diameter A: 40~110mm
-
Standard square bracket for base
Material: SS400 Surface treatment: black, nickel plating Height B: 20~70mm Outer diameter A: 40~110mm
-
Standard square hole bracket for base
Material: SS400, A6061 Surface treatment: black, nickel plating, black anodizing, natural anodizing Outer diameter A: 38~62mm Height L: 24~48mm
-
Super simple pillar fixing clamp, same diameter orthogonal type, same diameter orthogonal type with butterfly knob
Material: A6061 Surface treatment: Black anodized, natural anodized Height B: 10~22mm Length L: 29~54mm
-
Support base mounting base, simple through-hole type
Pillar material: S45C high frequency quenching, S45C, SUS304 Pillar surface treatment: nickel plating Bracket material: S45C, SUS304 Bracket surface treatment: chrome plating, nickel plating Height L: 50~450mm Outer diameter A: 38~82mm
-
Switch Probes – SNP Series
Mechanical ON/OFF switching via axial probe movement. Modular design integrates with automated test platforms for functional validation and safety interlocking. Collaborative spec adjustments supported.
-
Tapered Roller Bearing, Outer Ring Without Rib, Standard Type
Main Material: SUJ2
Type: Tapered Roller Bearing, Outer Ring Without Rib, Standard Type
Width T: 13.25~90.5mm -
Tapped Dowel Pins – MSTM / MSTP / MSTH / MS
Our tapped dowel pin series (MSTM, MSTP, MSTH, MS) is widely used in die and mold bases, automation equipment, and jigs. These pins include center-tapped ends to allow for easy extraction or precise bolt locking.
-
Thin magnet with base
Outer diameter D: 4~25mm Material: SUM24L, neodymium magnet, SUS416 Surface treatment: nickel-plated, no
-
Thrust Ball Bearing
Main Material: SUJ2 Type: Thrust Ball Bearing Outer Diameter D: 2452mm Inner Diameter d: 1030mm
-
-
Tubular Standoff Set Screw Type
Pipe material: STKM13A, SUS304 Bracket material: SS400, SUS304 Surface treatment: galvanized, nickel-plated Height L: 200~1000mm Outer diameter A: 90~160mm
-
Tubular support with external thread
Tube material: STKM13A, SUS304 Bracket material: SS400, SUS304 Surface treatment: nickel plating Outer diameter A: 100~160mm Height H: 60~150mm